Sun Microsystems Netra CP3060, User Manual

Page: 40 / 129

2-12 Netra CP3060 Board User’s Guide • April 2009
FIGURE 2-5
Installing the Sun Netra CP3060 Rear Transition Module
2.5.1.1 Installing a Rear Transition Module
1. Verify that you have taken the necessary antistatic precautions.
2. Go to the rear of the system and choose an appropriate slot for the RTM.
RTMs must be installed inline behind the accompanying node blade server. For
example, if the accompanying node blade server is installed in slot 3, its RTM
must be installed at the back of the system in slot 3. See
FIGURE 2-5
.
Netra CP3060 blade server
Netra CP3060 RTM
Zone 3
connectors
(installed from front)
(installed from rear)
ATCA chassis midplane