Sun Microsystems Netra CP3060, User Manual

Page: 39 / 129

Chapter 2 Hardware Installation 2-11
2.5 Installing the Sun Netra CP3060 Blade
Server
If you are installing the Sun Netra CP3060 blade server with the RTM, first install the
RTM at the rear of the server. Then install the node card in the front of the server.
Even though you will be installing the RTM first, look at the front of the server and
locate the slot number where you will be installing the Sun Netra CP3060 blade
server. Then go to the back of the server and install the RTM in that particular slot.
2.5.1 Installing the Sun Netra CP3060 Blade Server
With a Rear Transition Module
A compatible RTM must be used with the Sun Netra CP3060 blade server for rear
I/O access. The RTM enables access to the network, to a boot device, and to a
console terminal. You can use the Sun Netra CP3060 RTM, or you might design your
own rear transition module.