Sun Microsystems Netra 120, User Manual

Page: 108 / 200

8-8 Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
8.3 Monitoring the Server From the LOM
Shell
This section describes the commands that enable you to check the status of the
components monitored by the LOM device. It also describes how to view the events
stored in the LOM device’s event log.
8.3.1 Checking How Long the Server Has Been
Running
To find out how much time has elapsed since the last boot, type:
or:
8.3.2 Checking the Current Status of All Components
To see the current status of all the components monitored by the LOM device, type:
FIGURE 8-2
shows some sample output from the
environment
command. In this
example, all the components are running normally and none are faulty.
Note –
For the locations of the different fans, see Section 8.9, “Checking the Status
of the Server’s Fans” on page 8-23.
lom> date
Time since last boot: +8d+20h48m2s
lom> showdate
Time since last boot: +8d+12h23m6s
lom> environment