Sun Microsystems Enterprise 250, Owner'S Manual

Page: 276 / 369

TABLE 12–1 (continued)
Command Description
except
#
,
#
,
Run all test(s) except those identified by menu entry number (#) in the
command line.
what
#
,
#
,
Displays selected properties of the device(s) identified by menu entry
number (#) in the command line. The exact information provided varies
according to device type.
OBDiag Configuration Variables
The following table provides information about OpenBoot PROM configuration
variables that affect the operation of OBDiag. Use the
printenvs
command to show
current values and the
setenv
command to set or change a value. Both commands
are described in “OBDiag Commands” on page 241.
TABLE 12–2
Variable Setting Description Default
diag-level off
No tests are run at power up.
min
Performs minimal testing of core
functionality.
min
med
Performs functional tests for all
system functions.
max
Runs exhaustive tests for all
functions except external
loopbacks. External loopback tests
are run only if
diag-targets
is
set to
loopback
,
loopback3
,
device&loopback
, or
device&loopback,3
.
diag-
continue?
false
Stops testing within a test routine
and prints a message as soon as an
error is detected. OBDiag then
skips to the next test routine in the
sequence.
false
242
Sun Enterprise 250 Server Owner’s Guide
♦
Revision A, June 1998