Sun Microsystems DGA 5000, Operator'S Manual, Page: 75 / 84

9.6.6 General

The exterior of the cabinet may be cleaned using a damp soft lint-
free cloth. Use a mild detergent to remove grease.
Do not use solvents (acetone, benzine etc.). These can damage
plastic components and affect sampling accuracy if they
contaminate the sampling system.

Clean up any liquid spills immediately to protect the exterior of the
unit and to prevent any spillage from entering the ventilation
vents.

Test leads and the main power cable may be cleaned by using a
water-free hand-cleanser and wiping dry with a cloth.
9.7 Error, Warning and System Status
Messages
The DGA 5000 system gives error, warning and system status
messages in two ways:
- By means of automatic pop-up windows.
-
By means of the “Error/Warning” button on the toolbar.
9.7.1 Automatic Pop-up Windows
Automatic pop-up windows will be displayed to indicate the following
system statuses:
- Warm-up
- Zero-calibration.
- HC residue check .
66
E
RROR
, W
ARNING AND
S
YSTEM
S
TATUS
M
ESSAGES