Sun Microsystems DGA 5000, Operator'S Manual, Page: 53 / 84

•
Use the
“Limits” button to enable or disable the Limit Sets.
Pressing the “Limits” button will change the status of the limit sets
from ON to OFF and vice versa. The “Limits” button will be Green
when the limits are switched ON and Red when the limits are
switched OFF.
To
toggle between “Limit Sets On” and “Limit Sets Off” or vice versa:
• Click with the mouse on the “Limits” button, or
• Select the “Limits” button with the cursor keys and press “Enter”.
8.3 Saving and Loading Vehicle Setups
The vehicle setup currently displayed in the Vehicle Setup Screen can
be saved in the PC memory for future use.
The information stored will be:
- Fuel type
- Speed Factor
- Limits On/Off
- Limit set values.
To save the current vehicle setup:
• Press the “Save Setup” button.
The Save Limits File dialog box will be displayed
Figure 8-4 The Save Limits Dialog Box
•
Check the location to which the file is to be saved.
•
Enter a name for the file in the File name box.
•
To
save the setup click “Save” or press the “Enter” key.
The file containing the vehicle setup will be saved and can be
recalled for future use using the “Load Setup” button.
44
S
AVING AND
L
OADING
V
EHICLE
S
ETUPS