Sun Microsystems 5500, Reference Manual

Page: 291 / 304

H-1
A P P E N D I X
H
Compliance Statements
Safety Agency Compliance
Statements
Read this section before beginning any procedure. The
following text provides safety precautions to follow
when installing a Sun Microsystems product.
Safety Precautions
For your protection, observe the following safety
precautions when setting up your equipment:
• Follow all cautions and instructions marked on the
equipment.
• Ensure that the voltage and frequency of your power
source match the voltage and frequency inscribed on
the equipment’s electrical rating label.
• Never push objects of any kind through openings in
the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or damage
to your equipment.
Symbols
The following symbols may appear in this book:
Caution – There is risk of personal injury and
equipment damage. Follow the instructions.
Caution – Hot surface. Avoid contact. Surfaces
are hot and may cause personal injury if touched.
Caution – Hazardous voltages are present. To
reduce the risk of electric shock and danger to
personal health, follow the instructions.
On – Applies AC power to the system.
Depending on the type of power switch your device has,
one of the following symbols may be used:
Off – Removes AC power from the system.
Standby – The On/Standby switch is in the
standby position.
Modifications to Equipment
Do not make mechanical or electrical modifications to the
equipment. Sun Microsystems is not responsible for
regulatory compliance of a modified Sun product.
Placement of a Sun Product
Caution – Do not block or cover the openings of
your Sun product. Never place a Sun product
near a radiator or heat register. Failure to follow
these guidelines can cause overheating and affect
the reliability of your Sun product.
Caution – The workplace-dependent noise level
defined in DIN 45 635 Part 1000 must be 70Db(A)
or less.
SELV Compliance
Safety status of I/O connections comply to SELV
requirements.
!
!
!