Sun Microsystems 5500, Reference Manual

Page: 183 / 304

Chapter 12 Preparing for Service 12-11
12.4.2 Media Tray
To remove the media tray:
1. Remove the top bezel.
2. Loosen the three captive screws that hold the tray in place.
Insert a screwdriver in the notch at the top center of the media tray to pull out the
media tray. (
FIGURE 12-8
).
3. Remove the seven screws on top of the media tray to lift off the tray cover to
access CD and tape drives (
FIGURE 12-8
).
FIGURE 12-8
Removing the Media Tray
To replace the media tray, reverse these procedures.
12.5 Powering On the System
All of the panels should be in place before you turn on the electical power. See
Section 11.3 “Restarting the System,” to power-on.
Notch
Captive screw