SUN CREATIVE ZS-H350, User Manual

Page: 24 / 26

19
 Set to default: Reset all parameters above to default value (see values with underline above).
Remark:
Gain, brightness and enhancement setups only take effects for image performance but not for in
image mode.
Features setup
The menu structure is shown as in below:
功能设置
(Features setup)
===================
高温报警
=>(High temperature alarm)
返回
(Return)
退出
(Exit)
The high temperature alarm menu structure is shown as in below:
高温报警
(High temperature alarm)
===================
高温追踪
(High temperature tracking):ON
高温报警
(High temperature alarm):ON
报警温度
(Alarm temperature):120.0
温度系数
(Temperature coefficient):32
保存
(Save)
返回
(Return)

High temperature tracking: To set whether to track (ON) or not (OFF) the highest temperature
point.

High temperature alarm: To set whether to make alarm (ON) or not (OFF) when the highest
temperature event occurs.

Alarm temperature: To set the alarm temperature (0~1000
℃
);

Temperature coefficient: This value can be set between 1~256;
Remark:
The High temperature alarm menu can be called by send command “ preset point 126 #” from serial
port. In this case the Return option in this menu will take no effect.
Language
This menu can be accessed from “Language” option from main menu:
语言
(language)
==========================
语言选择
Language selection:
中文
(Chinese)
保存
(save)
返回
(return)
退出
(exit)
Currently only “Chinese” language is supported, in the later version “English” will be supported;