16
通讯方式
(communication mode):RS485
协议
(agreement): PELCO-D
波特率
(Baud rate):2400
地址
(address):256
恢复默认
(Restore the default)
应用
(Apply)
返回
(Return)
退出
(Exit)
Communication mode: RS485, RS422, RS232 optional, the default port is to use RS485;
Protocol: Currently support
SP-ZS
(A SunCreative® private protocol used to upgrade or maintain
devices based on RS232 & RS485) and
PELCO-D
protocol, the default protocol is PELCO-D.
Baud rate: The baud rate is shared by two protocols, several fixed values are listed here for
choice:2400, 4800, 9600, 19200, 38400, 57600, 115200. The default value is 2400;
Address: To set the device address, the value range is from 0 to 256. 256 were broadcast address,
The default value is 256;
Restore the default: Restore the serial port parameters to default.
Apply: Save and make into effect
Maintenance
Maintenance functions include manually/auto fixing of bad pixels, obtain equipment information, and
restore to factory settings. The menu structure is shown as below:
维护
(Maintenance)
===================
盲元处理
(Bad Pixels Fixing)=>
关于
(About)=>
恢复出厂
(Restore to the factory settings)
返回
(Return)
退出
(Exit)
Bad Pixels Fixing: User can use this option to enter to the “Bad pixels fix” Sub-menu to
automatically or manually by moving keys to select and fix bad pixels.
About: To display the serial number of the program, firmware version and program build time.
Restore to the factory settings: Restore all parameters to factoring settings except the serial port
settings.
Remark
:
1) In V1215 and later version information about order number is included in the format
“ON:N********”, for example, “ON: N15101601”, for standard version (non-customized) this
information is displayed as “ON: NULL”.
