7
Attentions:
i. Before breaking and opening each packing box please make sure that the items are in
accordance with the checking list.
ii. Before installation, please read carefully the user manual.
iii. When installing a network camera, please be sure to close all the AC power.
iv. Check the voltage of power supply: Avoid the voltage mismatch of the power supply
with product specifications.
v. Connect the power supply
g.
After the installation is completed, the power-on test could be started. Each time after
power-on, PTZ platform will make self-check to ensure that everything is OK. After the
test, the screen will switch to the current video image. Only after when the power-on
test is completed, the PTZ platform could be operated. For some abnormalities that have
been found during the process of self-check, You may refer to the appendix to fix and
maintain them. For other instructions about the operation of this product, please refer
the attached discs and find the related content.
6.3 Verifying Camera
Insert the compact disk, run the software in it, then connect the switches to the computer(more than
one camera can connect with computer through switch). The SDAP software will automatically search
all equipment within the local area network (LAN), and online detection will be made to show all normal
connected cameras.
Important:
The infrared thermal imaging camera camera:192.168.83.27.
The default user name/password is:
admin/admin12345.
Warning
:
You should change this default user name and password as soon as possible in order to avoid any
hostile attack, and save the pairs in a safe place
Based on the IP address searched out, it is necessary to add an IP sub-network segment for it; when you
are configuring the IP address, please keep the device IP address and PC IP address same network
segment so that they can “see” each other. Below is an example of the SDAP software searching
interface (It varies with the integrated Encoder/Decoder):
