PG 5
SEAT SUPPORT (continued)
3.
Attach the Seat Support next. (
see figure 11
) Position the rear inside the
welded brackets on both Rear Seat Support Bars.
4.
Pivot the two Front Seat Support Bars up into the bracket on the Seat
Support.
5.
Secure all four locations using
1 3/4” bolts and lock nuts
as shown in
figure 12
. Leave these hand tight for now.
SEAT SUPPORT
(PN 82074.7)
11
1 3/4” BOLTS, LOCK NUTS -
HAND TIGHT
12
6.
The Cross Tension Bars are installed next.
Position one between the back of the Front Armrest
Bar and the holes on the front of the Platform
shown in
figure 13
.
7.
Secure using two
1 1/2” bolts and lock nuts
.
8. Repeat Steps 6 - 7 for the other side.
13
1 1/2” BOLTS, LOCK NUTS -
HAND TIGHT
CROSS TENSION BAR
(PN 82074.8)
GUNREST
1.
Position the Gun Rest as shown in
figure 14
.
2.
Line up the four bolt holes and attach using
2
1/4” bolts with lock nuts
. Leave these hand tight
for now. (
see figure 15
)
GUNREST
BAR
(PN 82074.9)
14
2 1/4” BOLTS, LOCK NUTS -
HAND TIGHT
15
Hardware Needed
1/4X20 - 2 1/4” Bolt
- 4
1/4X20 - Lock Nut
- 4
