PG 3
3
TOOLS REQUIRED
Tools
Use
• 7/16” Wrenches and / or Socket / Ratchet
Main Ladder Bolts / Nuts -1/4x20 hardware
• 1/2” Wrenches and / or Socket / Ratchet
5/16x18 hardware
- Assembly can be made easier by the use of a powered ratchet or drill with socket adapter (take care not to overtighten
when using power tools to assemble)
- It is recommended that all bolts be sorted by thread count / length prior to assembly.
4
ASSEMBLY
3/4” BOLTS, LOCK NUTS -
WRENCH TIGHTEN
2
PLATFORM
1.
Position the Left and Right Platform sections
as shown in
figure 1
.
2.
Slide the sections together and secure using
three
3/4” bolts and lock nuts
as shown in
figure 2
.
LEFT
PLATFORM
(PN 82074.2L)
RIGHT
PLATFORM
(PN 82074.2R)
1
3.
Flip the Platform Assembly over. Position one of
the Rear Seat Supports over the rear U Bracket as
shown in
figure 3
.
4.
Secure using one
1 3/4” bolt and lock nut
as
shown in
figure 4
. Leave this bolt hand tight for
now.
REAR SEAT
SUPPORT
(PN 82074.3)
3
4
1 3/4” BOLT, LOCK NUTS -
HAND TIGHT
Hardware Needed
5/16X18 - 3/4” Bolt
- 3
5/16X18 - Lock Nut
- 3
1/4X20 - 1 1/2” Bolt
- 4
1/4X20 - 1 3/4” Bolt
- 2
1/4X20 - 2 1/4” Bolt
- 2
1/4X20 - Lock Nut
- 8
