PG 4
www.summitstands.com
SEAT SUPPORT
1.
Position both Front Seat Support Bars as shown
in
figure 9
.
2.
Position the bars between the welded on U
brackes and secure using one
1 3/4” bolt and lock
nut
per side as shown in
figure 10
. Leave these
hand tight for now.
PLATFORM (continued)
5.
Position the Left Armrest Bar as shown in
figure 5
.
6.
Slide the bar down on top of the Rear Seat Support
and line up the holes. Secure using one
1
1/2” bolt
and lock nut
as shown in
figure 6
. Leave these hand
tight for now.
6
1 1/2” BOLT, LOCK NUTS -
HAND TIGHT
7.
The Front Armrest Bar attaches next. Slip it into
the end of the Left Armrest Bar and align the lower
hole to the Platform as shown in
figure 7
.
8.
Secure using one
1 1/2” bolt and lock nut
at the
upper location and one
2 1/4” bolt and lock nut
at
the lower location. Leave these hand tight for now.
See figure 8.
9. Repeat Steps 3 - 8 for the other side.
1 1/2” | 2 1/4” BOLTS, LOCK
NUTS - HAND TIGHT
8
5
LEFT ARMREST BAR
(PN 82074.5L)
7
FRONT ARMREST BAR
(PN 82074.4)
1 3/4” BOLTS, LOCK NUTS -
HAND TIGHT
10
9
FRONT SEAT
SUPPORT BAR
(PN 82074.6)
Hardware Needed
1/4X20 - 1 1/2” Bolt
- 4
1/4X20 - 1 3/4” Bolt
- 6
1/4X20 - Lock Nut
- 10
