Summers ULTIMATE NT, Operator'S Manual

Page: 43 / 192

SECTION 3 - MAINTENANCE
3.1
3.1 MAINTENANCE SAFETY
1. STOP engine, place all controls in neutral, set parking
brake, remove ignition key and wait for all moving parts to
stop before servicing, adjusting, maintaining or unplugging.
2. KEEP CHILDREN AWAY from chemicals and sprayer equipment.
3.
USE EXTREME CARE
when cleaning, filling or making adjustments.
4. USING CHEMICALS? PROTECT YOURSELF!
HIGH HAZARD 1. REFER TO SIGNAL WORD AND REQUIRED
REQUIRES: PERSONAL PROTECTIVE EQUIPMENT WHEN
*goggles USING CHEMICALS.
* respirator
*avoid fumes 2. ALWAYS READ AND FOLLOW CHEMICAL
*rubber gloves and MANUFACTURERS’ WARNINGS,
skin protection INSTRUCTIONS AND PROCEDURES BEFORE
USING.
MODERATE HAZARD
REQUIRES: 3. HANDLE CHEMICALS WITH EXTREME CARE.
*goggles
*avoid fumes 4. IN CASE OF POISONING, GET IMMEDIATE
*rubber gloves and MEDICAL ATTENTION. A CONTAINER
skin protection LABEL MAY BE BENEFICIAL FOR QUICK
TREATMENT.
LOW HAZARD 5. BE SAFE!
REQUIRES:
*avoid fumes
*
rubber gloves and
skin protection
5. BE CAREFUL when working around high pressure hydraulic system.
6. ALWAYS
make sure that pressure is relieved from hydraulic circuits before servicing or disconnecting
from tractor.
7. KEEP SAFETY DECALS CLEAN.
8. REPLACE
missing or unreadable decals. New decals are available from your SUMMERS dealer by
stating correct part number (PN) located on the decal. See Section 1.5 DECAL LOCATIONS.
9. VERIFY
all safety devices and shields are in place before using machine.
10. KEEP hands, feet, hair and clothing away from moving parts.
IMPORTANT!
CERTAIN CHEMICALS AND FERTILIZERS MAY
CAUSE PAINT DETERIORATION. TO REDUCE
CHANCE OF SPRAYER PAINT DETERIORATION,
CLEAN SURFACES CONTACTED BY CHEMICAL
CAUTION
REVIEW SECTION 3.1 SPRAYER OPERATION
SAFETY BEFORE PROCEEDING