2.1
SECTION 2 - SPRAYER OPERATION
2.1 SPRAYER OPERATION SAFETY
1. READ AND UNDERSTAND Operator’s Manual before
using machine.
2. DO NOT ALLOW RIDERS.
3. ONLY TOW
at a safe speed. Use caution when making corners or meeting traffic.
4. USE a safety chain between tractor drawbar and sprayer hitch when transporting on public roads.
5
.
ALWAYS fold booms into transport rest and secure when transporting on public roads.
6. STOP engine, place all
controls in neutral, set parking brake, remove ignition key, and wait for all
moving parts to stop before servicing, adjusting, maintaining, or unplugging.
7. KEEP CHILDREN AWAY from chemicals and sprayer equipment.
8. USE EXTREME CARE
when cleaning, filling or making adjustments.
9. USING CHEMICALS?
PROTECT YOURSELF!
HIGH HAZARD
REQUIRES:
1.
REFER TO SIGNAL WORD AND REQUIRED
*goggles
PERSONAL PROTECTIVE EQUIPMENT WHEN
*
respirator
USING CHEMICALS.
*avoid fumes
*
rubber
gloves
and
2. ALWAYS
READ AND FOLLOW CHEMICAL
skin protection
MANUFACTURERS’ WARNINGS,
INSTRUCTIONS
AND PROCEDURES BEFORE
MODERATE HAZARD
USING.
REQUIRES:
*goggles
3
HANDLE CHEMICALS WITH EXTREME CARE.
*avoid fumes
*rubber gloves and
4.
IN CASE OF POISONING, GET IMMEDIATE
skin protection
MEDICAL ATTENTION. A CONTAINER
LABEL MAY BE BENEFICIAL FOR QUICK
LOW HAZARD
TREATMENT.
REQUIRES:
*avoid fumes
5.
BE SAFE!
*rubber gloves and
skin protection
10. BE CAREFUL when working around high-pressure hydraulic systems.
11. ALWAYS make sure that pressure is relieved from hydraulic circuits before servicing or disconnect-
ing from tractor.
12. VERIFY all safety devices and shields are in place before using machine.
13. KEEP hands, feet, hair and clothing away from moving parts.
CAUTION
REVIEW SECTION 2.1 SPRAYER OPERATION
SAFETY BEFORE PROCEEDING
Summary of Contents for ULTIMATE NT
