SummaCut cutter
User’s Manual
Setup
1-23
4.
Press
twice to leave the knife pressure menu.
CAUTION:
After setting the cutting depth and/or the knife pressure, perform a thorough
visual check of the knife blade, which can be seen protruding from the knife holder, and
test cutting results on a scrap of vinyl media.
WARNING:
Do not operate the cutter if the knife blade cuts through the media backing, as
this will seriously damage the cutter's rubber cutting strip and the knife.
CAUTION:
For most vinyl cutting operations, the knife blade tip will be barely visible at the
bottom of the knife tool. If the knife blade tip is clearly visible, then the cutting depth must
be readjusted.
To prevent damage to the cutter, check the depth of the knife blade tip and the quality of
the cut each time you load a different type of vinyl into the cutter.
Summary of Contents for SUMMACUT
Page 1: ...User s Manual Rev 004...
