SummaCut cutter
User’s Manual
Setup
1-6
5.
Tool carriage:
The tool carriage is the mount for the knife holder, pen or pouncing tool.
It has also holds the Optical POSitioning sensor (OPOS).
6.
Cutting strip:
A self-healing orange strip helps avoid any damage to the knife tip when
no media has been loaded. Since cutting is done on the cutting strip, it is essential that
the strip remains intact.
7.
Media sensor:
A media sensor behind the right sleeve is used to detect the end of the
loaded media.
8.
Media guide:
Only on smaller models, prevents the media slipping under the cutter
when installed on a table.
9.
Screws to secure the cutter base:
Make sure all screws are secured at each side before
the cutter is used.
10.
Media basket:
The stand and linen media basket come standard with all D120, D140
and D160 models.
Summary of Contents for SUMMACUT
Page 1: ...User s Manual Rev 004...
