Setup
1-1
1
Setup
1.1
Unpacking the Cutter
NOTE:
Save the shipping box and any other
packaging items in case the cutter needs to be
shipped. Do not ship the cutter without first completely repacking it in its original
packaging.
Before unpacking the cutter, make sure that there is enough space to assemble the stand
and to set the cutter aside to insert the stand screws.
CAUTION
:
For safety reasons, no fewer than two people should be involved in unpacking
the cutter.
1.1.1
Removing the packaging from the cutter
1.
Remove the straps and the staples and open the lid of the box.
2.
The cutter is packed in foil. The models D120, D140 and D160 are delivered with the
stand and basket under in the box. The accessories are located at the side in a separate
box. Check first whether everything is present.
3.
Do not throw away the packaging. Shipping it without the original box voids any
warranty.
FIG 1-1
1-1
SUMMACUTTER CUTTER FULLY BOXED
Summary of Contents for SUMMACUT
Page 1: ...User s Manual Rev 004...
