S One
User’s Manual
Basic operation
2-4
1.
Power on the cutter and load the media.
2.
Press on pressure
3.
Press the arrow up or down
to change the value.
4.
Or fill in the new value
1.
Press
to perform the internal knife pressure test.
2.
Press
to confirm the chosen knife pressure.
3.
Press
to leave the pressure unchanged.
Once
is pressed, the current knife pressure value will be automatically set to the new
value and the cutter will cut the knife pressure test pattern.
Peel out the rectangle and inspect the media backing.
FIG 2-3
2-3
PEELED KNIFE PRESSURE TEST PATTERN
The knife depth is set correctly when the test pattern cuts completely through the vinyl, the
vinyl is removed, and the blade tip visibly scratched the front side of the media backing. The
blade should never cut through the backing; just slightly scratch the silicon coating and first
few fibres of the backing material.
S1D160
50000 x 145 mm
Knife
700 mm/s
90 g
Configuration 1
LAN 192.168.10.2
Knife pressure
1 2 3 0
4 5 6 .
7 8 9 C
90
85
g
Knife pressure
1 2 3 0
4 5 6 .
7 8 9 C
90
85
g
2.2.2
Changing the tool pressure
