S One
User’s Manual
Introduction
1-2
WARNING:
This equipment is not suitable for use in locations where children are
likely to be present.
WARNING:
The S One cutters use razor-sharp knives. Touching the knife with bare
hands may cause injury. Do not touch the knives while the machine is cutting.
WARNING:
There is a risk of injury from being caught or trapped in moving
machine parts.
Keep hands, hair, clothing and jewellery away from moving parts. Do not wear
jewellery, loose clothing, scarves, open jackets or shirtsleeves.
The entire base plate should be considered as a dangerous area when the cutter is switched
on and off. The tool carriage can move from the left to the right and the media grit rollers are
sharp and can grab loose objects, clothing or body parts.
NOTE:
Make sure to observe all the caution labels on the cutter.
The cutter constantly measures the current through the motors. If the machine detects the
current is too high, then the current will be cut off to the motors and a fatal error message will
be displayed on the control panel.
There are no user-serviceable parts inside the S One cutters. For servicing refer to qualified
personnel only.
Turn off the cutter and contact a service representative in any of the following cases:
•
There is visible mechanical damage.
•
The power cord is damaged.
•
The cutter has been damaged by an impact.
•
Liquid was spilt on the cutter.
•
There is a strange noise, smoke or an unusual smell coming from the cutter.
•
The cutter has been dropped.
1.1.3
Safety precautions
