7-1
7. Other convenient functions
｜
Back monitor type
7. Other convenient functions
❚
Back monitor type
The screen display rotates upside down automatically when the monitor is set to
the back monitor type by flipping it up. The back monitor type is convenient
when you would like to place fiber close to you.
The TYPE-82C+ incorporates various functions. Set up and utilize the
functions as necessary.
When the monitor is in the back position, your splicing work is easier if the
right-hand and left-hand coating clamps are swapped. Refer to the
following procedures.
1: Loosen the coating clamp fixing
screw to remove the coating clamp.
2: After swapping the right-hand and
left-hand coating clamps, tighten
the coating clamp fixing screw. The
lid of the coating clamp is opened in
the same direction as the front
monitor type.
Back monitor
Operating direction
Flip up
Coating clamp fixing screw
Coating clamp