4-7
4.Splice program
｜
Splice program editable items 2/2
4. Splice program
❚
Splice program editable items 2/2
Editable items
Details
Operator
Administrator
View
Edit
View
Edit
Align method
Sets fiber alignment method. Choose
from “Core”, “Diameter” and “Adaptive”.
“
Core”…Aligns the center of the cores of
right and left optical fibers.
“
Diameter”…Aligns the center of the
diameters of right and left optical fibers.
“
Adaptive”…is useful in splicing optical
fiber with complicated core profile.
✔
-
✔
✔
AIAS
When core to cladding concentricity is
high, surface tension pulls the claddings
into alignment and misaligns the cores,
having an effect on splice losses. The
splicer automatically performs an axis
shift prior to arc fusion to minimize the
effect. (Select ON
⇔
OFF
）
✔
-
✔
✔
NanoTune
Automatically optimizes splice condition.
(Select ON
⇔
OFF
）
✔
-
✔
✔
NanoTune Threshold
Sets the NanoTune active level.
✔
-
✔
✔
Splice Method
Sets the splicing process to Automatic or
Manual.
✔
-
✔
✔
MFD Mismatch Coef.
Sets the coefficient for an estimated loss
yielded due to MFD mismatch.
-
-
✔
✔
Wavelength
Sets the wavelength for loss estimation
calculation.
✔
-
✔
✔
MFD-L
Sets the MFD of left side optical fiber.
✔
-
✔
✔
MFD-R
Sets the MFD of right side optical fiber.
✔
-
✔
✔
Est. Loss Coef.
Sets the coefficient for loss estimation.
-
-
✔
✔
Minimum Loss
Sets the value to be added to an
estimated loss.
-
-
✔
✔
Est. Loss Limit
Sets the threshold of estimated loss. If a
reading exceeds the threshold, the splicer
will give an error.
✔
-
✔
✔
Rearc Time
Sets the time for additional arc to be
conducted after splicing.
✔
-
✔
✔
Estimation Mode
Sets the loss estimation method to
“High(HDCM)” or “Standard”. If “High” is
chosen, the splicer will observe and
inspect the core of spliced fiber with very
high precision after fusion splicing.
✔
-
✔
✔
Rearc Power
Sets the output power of additional arc.
-
-
✔
✔
Proof Test
Enables or disables the proof test to be
performed after splicing. If disabled, the
proof test is not performed by pressing
the SET icon or key and opening the hood.
-
-
✔
✔
Bubble check
Enables or disables the function of bubble
check for spliced fiber.
✔
-
✔
✔