background image

12

14. Warranty

Warranty

Period

Warranty

Condition

Exception

for

Warranty

Notwithstanding the above warranty, the warranty as set forth herein shall not be applied to the problems, troubles or
damages on the Products which are caused by: 

1. installations, connections, combinations or integration of the Products in or to other equipment or machines, which

are supplied by any person or entity other than the Seller,

2. insufficient maintenance or improper operation by the Buyer or its customers, such that the Product is not

appropriately maintained in accordance with the maintenance manual provided or designated by the Seller,

3. improper use or operation of the Products by the Buyer or its customers which are not informed to the Seller,

including, without limitation, the Buyer's or its customers' operation of the Products not in conformity with the
specifications, or use of the lubrication oil in the Products which is not recommended by the Seller,

4. troubles, problems or damages on any equipment or machines in or to which the Products are installed, connected

or combined or installed, or any specifications particular to the Buyer or its customers, or 

5. any changes, modifications, improvements or alterations on the Products or those functions which are rendered on

the Products by any person or entity other than the Seller,

6. any parts in the Products which are supplied or designated by the Buyer or its customers,
7. earthquake, fire, flood, sea-breeze, gas, thunder, acts of God or any other reasons beyond the control of the Seller,
8. waste, exhaustion, normal wear and tear, or deterioration on the parts of the Products, such as bearing, oil-seal.
9. any other troubles, problems or damages on the Products which are not attributable to the Seller.

The warranty period for the Products shall be 18 months after the commencement of delivery or 18 months after the
shipment of the Products from the seller's works or 12 months from the Products coming into operation, whichever comes
first.

In case any problems, troubles or damages on the Products arise due to defects in the Products during the above
"Warranty Period", although the Products are appropriately and properly installed in, connected or combined to the
equipment or machines, or maintained in accordance with the maintenance manual and are properly operated under the
conditions as described in the catalogue or otherwise as agreed upon in writing between the Seller and the Buyer or its
customers, the Seller will Provide, at its sole discretion, appropriate repair or replacement on the Products free of
charge, except as stipulated in the "Exception for Warranty" as described below.
However, in the event that the Products is installed in, connected or combined to or integrated into the equipment or
machines, the Seller shall not reimburse the costs for removal or re-installation of the Products or other incidental costs
related thereto and any lost opportunity, loss of profit or any other incidental or consequential losses or damages
incurred by the Buyer or its customers.

The scope of our warranty for our products is limited to the range of our manufacture.

Warranty (period and contents)

Summary of Contents for PARAMAX SFC Series















Reviews: