background image

2

Upon delivery of the PARAMAX DRIVE FOR AIR COOLED CONDENSERS, check the following : 

(1) The descriptions on the rating plate conform to your order.
(2) There were no parts damaged during transport.
(3) All bolts and nuts are firmly tightened.

If there is any doubt that the unit delivered does not conform to the one ordered, contact the nearest agent, distributor or
service office.

1. 

Inspection upon delivery

 

. Have the 

MODEL,

RATIO  and     SERIAL No. information ready when making inquiries.

M O D E L

SERIAL NO.

R AT I O

S. F

k W

r/min

I N P U T

R

J A P A N

SU

4

5

4

4 905

4

Type of reducer

Reduction ratio

Input power 

Service factor

Serial number

Fig. 1 Rating plate

CAUTION

Unpack the unit after verifying that it is positioned right side up ; otherwise, injury may result.
Verify that the unit received is in fact the one ordered. When a different product is installed, injury or damage
to the system may result.
Do not remove nameplate.

1-1) How to check the rating plate

1-2) Types of reducers

Symbols denote the following. Check that the type of reducer conforms to your order.

SFC

Series

Size

Gear Stages

Shaft

Arrangement

Accessories

Nominal

Ratio

Output Torque

(kNm)

R2

RJL

Motor

Adapter

(Standard)

RML

Motor

10
11.2
12.5
14
16
18
20
22.4

045     (10.0)

055     (18.0)

060     (21.7)

065     (27.5)

070     (35.5)

075     (44.0)

SFC

065

P2

14

RJL

N

Right Angle

Double Reduction

FB

F

N

NB

:  With Cooling Fan

:  With Cooling Fan &
   Backstop

!

 

:  No Cooling Fan

(Standard)

:  No Cooling Fan & 
   With Backstop

Summary of Contents for PARAMAX SFC Series















Reviews: