Sullivan-Palatek 125UD, Operating And Parts Manual

Page: 9 / 64

__________________________________SULLIVAN-PALATEK
9
SECTION 2 SPECIFICATIONS
MODEL 125UD 150UD 200UD 250UD
MOTOR SIZE (HP) 125 150 200 250
CFM AIR DELIVERY @ 100PSI 600 730 935 1130
CFM AIR DELIVERY @ 115PSI 575 685 880 1065
CFM AIR DELIVERY @ 125PSI 550 680 825 1010
CFM AIR DELIVERY @ 150PSI 505 590 765 970
COOLANT CAP.–GAL. SYST/TANK 33/25 33/25 33/25 33/25
MIN. FULL LOAD PRESSURE 70 70 70 70
DIMENSIONS: OPEN ENCLOSED
LENGTH 96 96
WIDTH 58 58
HEIGHT 66 3/8 67
NOTE: SEE INSTALLATION DRAWINGS IN SECTION 9 OF THIS MANUAL
2.1 DATA AND DIMENSIONS
SULLIVAN-PALATEK reserves the right to change the design or construction of the above compressors,
or to offer them with options which will cause subject equipment to differ from the above specifications,
without reference to any descriptions in this manual.
2.2 LUBRICATION GUIDE
SULLIVAN-PALATEK recommends using Palasyn 45 synthetic lubricoolant for normal plant-air service.
For compressors running two or three shift operations, extended life lubricants such as Pallube 32p, or
Pal-extra 44 are offered as factory fill. Also, where incidental food contact may happen, we offer a Food
Grade 32FLL.
For extreme environments (i.e. fine particulate, caustic, acidic, or oxidant atmospheres) contact the
factory for lubricant recommendations. Also, for such conditions we would suggest oil analysis every
1000 hours.
Mixing of these or any other type of oil or synthetic fluid will void the 5-year compressor unit warranty and
could result in greatly increased maintenance and service expenses.
2.3 APPLICATION GUIDE
Ambient Temperature Range: +35° to +104° F (+1° to +40° C). The lower temperature limit is to prevent
freeze-up of condensate in the aftercooler and/or control lines. When operating these compressors for
plant air in food or beverage processing industries, contact the factory for a lubricant that is FDA
approved for “incidental contact with foodstuffs." For instrument-grade air, contact the factory for
recommendations related to specialized compressed air preparation accessories.
Whenever a SULLIVAN-PALATEK rotary screw compressor is installed in parallel with a reciprocating
type of compressor, it is imperative that the SULLIVAN-PALATEK be the “lead” machine and the
reciprocating the “lag” machine. That is, the SULLIVAN-PALATEK should be the first to start and the last
to stop when being operated in the “automatic stop/start” mode, or the first to load and the last to unload,
when in the “continuous run” mode. It should require the least electrical power consumption for the
combination. The variable frequency drive will allow up to 20 starts per hour for all models.