Sullivan-Palatek 125UD, Operating And Parts Manual

Page: 56 / 64

SULLIVAN-PALATEK__________________________________
56
2011 Platinum and Platinum-Plus Warranty
New Industrial Compressors - 15 and greater Horsepower
Sullivan-Palatek hereby offers the following Platinum Extended Warranty to the first retail purchaser of an industrial compressors of
15 HP or larger, excluding XH high pressure models designed to operate at 250 psi or more. The Platinum Extended Warranty is
limited and applies to specific components as detailed below.
The terms, conditions and limitations contained in the Sullivan-
Palatek standard warranty, which is printed on the reverse, apply to the Platinum Warranty and that warranty is herein
incorporated by reference.
Component Coverage:
Platinum Warranty: Parts and labor to repair or replace as deemed necessary solely by Sullivan-Palatek, Inc. the Compressor Air
End, Compressor Motor, VFD Drive, Fan Motor (if installed) Air and Oil Coolers, Sump Tank, and Drive Coupling Assembly
(excluding elements).
Platinum Plus Warranty: Compressor Air End (stator and rotor assembly) repair or replacement, parts only. Labor, freight, travel
and other costs are expressly excluded.
Duration:
Platinum Warranty: 60 months from the date of start-up as evidenced by the required warranty registration documents.
Platinum Plus Warranty Duration: 120 months from date of start-up as evidenced by the required warranty registration
documents.
The Platinum and Platinum-Plus Extended Warranties are an extension of the standard Sullivan-Palatek, Inc. warranty and begin
upon expiration of that warranty and continue to the time limit measured from the delivery and start up of the compressor to the
original retail purchaser. Parts repaired or replaced under warranty are warranted for the remainder of the warranty period
applicable to the replaced part.
Registration and Obtaining Warranty Service: The platinum warranty registration and startup card supplied with the compressor
must be completed and returned within 10 days of delivery and start up to register the compressor in to the Platinum program.
Eligibility for the Platinum warranty will expire 180 days after shipment of the product from the factory and can only be reestablished
by application to the Sullivan-Palatek Product Support department, which may require a paid on-site inspection before granting.
Service under this warranty is obtained by contacting the authorized Sullivan-Palatek distributor before the expiration of the
warranty.
Sullivan-Palatek’s Obligations: Sullivan-Palatek, Inc. will repair or replace, at Sullivan-Palatek option any defective part, pay the
reasonable labor cost of making the repair or installing the replacement part when coverage includes labor, pay ground freight for
the return of defective parts and shipment of replacement parts.
Purchaser’s Responsibility: In addition to the responsibilities detailed in the standard Sullivan-Palatek, Inc. warranty the Platinum
Extended Warranty requires that the purchaser use Sullivan-Palatek brand compressor lubricant, filters and service parts obtained
from Sullivan-Palatek or one of its authorized distributors or service outlets. Proof of compliance with these terms must be available
and rendered upon request in the event of a claim under this warranty. To facilitate and ensure purchaser’s compliance with the
service requirements of the Platinum and Platinum Plus extended warranties purchaser will be required to buy one annual
maintenance kit per year during the period of the extended warranty and advise the model and serial number of the compressor for
which the kit is purchased.
This warranty applies to all Sullivan-Palatek stationary industrial air compressors of 15 horsepower or greater, excluding XH
models designed to operate at 250 psi or more shipped after April 1, 2011 and supersedes previous warranties. In the event of any
conflict between this warranty and earlier warranty statements, the terms of this warranty will prevail.