Sullivan-Palatek 125UD, Operating And Parts Manual

Page: 6 / 64

SULLIVAN-PALATEK__________________________________
6
1.3 FIRES/EXPLOSIONS
Clean up any spilled oil or oil leakage, and repair oil leaks as soon as they are discovered.
Do not allow oil to accumulate on, in, or around acoustic noise material. Immediately replace any oil-
soaked material after cleaning enclosure surface with nonflammable solvent.
Do not operate compressor when there is a possibility of its ingesting flammable, toxic or explosive
fumes, mists or particles.
Do not operate compressor with the temperature sensor inoperative or its Pressure Switch inoperative or
incorrectly connected.
Keep conductive objects away from exposed live electrical parts, such as terminals, to avoid sparks that
may serve as a source of ignition.
Replace the air/oil separator element only with factory original equipment replacement parts to be certain
that anti-static provisions are present.
Ground the machine in accordance with National Electrical Code (NEC) requirements.
Do not use plastic pipe for compressed air.
1.4 MOVING PARTS
WARNING: Do not operate the compressor with its Fan Guard removed.
Keep clothing, hands, arms, and other parts of the body, away from the fan and drive coupling.
Wear snug-fitting protective clothing (no neckties) and confine long hair when working around
compressor.
1.5 PHYSICAL DANGERS
Wear OSHA approved personal protective gear including gloves, safety shoes, safety glasses, head
covering, and ear protection when working on or around the compressor.
Avoid bodily contact with hot oil, hot surfaces, sharp edges and corners.
Keep all parts of the body away from all potential points of air discharge, including pressure relief valve
ports.
Keep an adequate first-aid kit nearby. Obtain medical assistance promptly in case of injury. Do not
ignore small cuts, burns or minor eye injuries as they may lead to infection.
Perform repairs and maintenance in well lighted conditions. Clean and dry components prior to servicing.
1.6 TOXICITY
WARNING: Air from this compressor should not be used for breathing air, unless you
adhere to specific OSHA standards.
Operate the compressor only in open or well-ventilated areas.
Carefully analyze the compressor inlet conditions to be certain that the compressor is ingesting no
dangerous levels of contaminants.
Do not permit air from this compressor to contact foodstuff except in compliance with FDA Standard 21
CFR 178.3570 and other applicable regulations. (Use food grade lubricant for such applications.)