Sullair 02250165-411 R01, User Manual

Page: 25 / 48

SECTION 4 WS CONTROLLER USER INTERFACE MANUAL
25
Power Interruption— A power interruption has
occurred at the controller.
Separator dP High— Separator pressure differential
has exceeded the set high limit.
Starter Aux. Contact —Starter auxiliary contact
failed to connect power to the starter.
UI Voltage Too High —The voltage to the User
Interface has risen above the set limit.
UI Voltage Too Low —The voltage to the User
Interface has fallen below the set limit.
VSD1 ... VSD2 Comm Fault— An error in
communication between the controller and the
specified VSD compressor has occurred.
VSD1 Parameter Error —An error has occurred
during setup of the VSD adjustments.