Sullair 02250165-411 R01, User Manual

Page: 37 / 48

SECTION 6 WS CONTROLLER USER INTERFACE MANUAL
37
NOTE
ELECTRICAL PREPARATION
Interior electrical wiring is performed at
the factory. Required customer wiring is
minimal, but should be done by a quali-
fied electrician in compliance with OSHA,
National Electrical Code, and/or any other
applicable State, Federal, and local elec-
trical codes concerning isolation
switches, fused disconnects, etc. Sullair
provides a wiring diagram for use by the
installer.
NOTE
Customer must provide electrical supply
power disconnect within sight of
machine.