5
GENERAL SAFETY REGULATIONS
Every time the tractor/machine assembly is to be
started up and used, you should ensure
beforehand that it complies with current legislation
on safety at work and Road Traffic regulations.
GENERAL
1 -
In addition to the instructions contained in this
manual, legislation relating to safety instructions
and accident prevention should be complied with.
2 -
Warnings affixed to the machine give
indications regarding safety measures to be
observed and help to avoid accidents.
3 -
When travelling on public roads, abide by the
provisions of the Highway Code.
4 -
Before starting work, it is essential that the
user familiarizes himself with the control and
operating elements of the machine and their
respective functions. When the machine is
running, it may be too late.
5 -
The user should avoid wearing loose clothing
which may be caught up in the moving parts.
6 -
We recommend using a tractor with a safety
cab or roll bar conforming to standards in force.
7 -
Before starting up the machine and beginning
work, check the immediate surroundings,
particularly for children. Make sure that visibility is
adequate. Clear any persons or animals out of the
danger zone.
8 -
It is strictly forbidden to transport any persons
or animals on board the machine whether it is in
operation or not.
9 -
The machine should only be coupled up to the
tractor at the specially provided towing points and
in accordance with applicable safety standards.
10 -
Extreme care must be taken when coupling
or uncoupling the machine from the tractor.
11 -
Before hitching up the machine, ensure that
the front axle of the tractor is sufficiently
weighted. Ballast weights should be fitted to the
special supports in accordance with the
instructions of the tractor manufacturer.
12 -
Do not exceed the maximum axle weight or
the gross vehicle weight rating.
13 -
Do not exceed the maximum authorized
dimensions for using public roads.
14 -
Before entering a public road, ensure that
the protective and signalling devices (lights,
reflectors, etc.) required by law are fitted and
working properly.
15 -
All remote controls (cords, cables, rods,
hoses, etc.) must be positioned so that they
cannot accidentally set off any manoeuvre which
may cause an accident or damage.
16 -
Before entering a public road, place the
machine in the transport position, in accordance
with the manufacturer’s instructions.
17 -
Never leave the driver’s position whilst the
tractor is running.
18 -
The speed and the method of operation must
always be adapted to the land, roads and paths.
Avoid sudden changes of direction under all
circumstances.
19 -
Precision of the steering, tractor adhesion,
road holding and effectiveness of the braking
mechanism are influenced by factors such as the
weight and nature of the machine being towed,
the front axle stage and the state of the land or
path. It is essential, therefore, that the appropriate
care is taken for each situation.
20 -
Take extra care when cornering, taking
account of the overhang, length, height and
weight of the machine or trailer being towed.
21 -
Before using the machine, ensure that all
protective devices are fitted and in good condition.
Guards that are damaged (even slightly) must be
replaced immediately.
22 -
Before using the machine, check that nuts
and screws are tight, particularly those for
attaching tools (tines, deflectors, ...). Tighten if
necessary.
23 -
Do not stand in the operating area of the
machine.
24 -
Caution! Beware the danger of being
crushed or seriously cut posed in some places on
remote-controlled units, in particular those that
are driven hydraulically.
25 -
Before climbing down from the tractor, or
before any operation on the machine, turn off the
engine, remove the key from the ignition and wait
until all moving parts have come to a standstill.
26 -
Do not go between the tractor and the
machinery without first applying the handbrake
and/or chocking the wheels.
27 -
. Before any operation on the machine, ensure
that it cannot be started up accidentally.
28 -
Do not use the lifting ring to lift the machine
when it is loaded.
29 -
When using a lifting device (hoist, cable, etc.),
the seed drill must be uncoupled from the harrow,
and both items manoeuvred separately.
PROPER USE OF THE MACHINE
Power harrows
must only be used for their
intended purpose (drilling on ploughed land or
minimum tillage).The manufacturer will not be
liable for any damage caused by using the
machine for applications other than those
specified by the manufacturer.
Using the machine for purposes other than those
originally intended will be done so entirely at the
user’s risk.
Proper use of the machine also implies:
- complying with instructions on use, care and
maintenance provided by the manufacturer;
- using only original or manufacturer
recommended spare parts, equipment and
accessories.
The harrow must only be operated, maintained and
repaired by competent persons, familiar with the
specifications and methods of operation of the
machine. These persons must also be informed of
the dangers to which they may be exposed.
The user must strictly abide by current legislation
regarding:
- accident prevention;
- safety at work (Health and Safety Regulations);
- transport on public roads (Road Traffic
Regulations).
Strict compliance with warnings affixed to the
machine is obligatory.
The owner of the equipment shall become liable
for any damage resulting from alterations made to
the machine by the user or any other person,
without the prior written consent of the
manufacturer.
HITCHING
1 -
When hitching or unhitching the machine from
the tractor, place the control lever of the hydraulic
lift in such a position that the lifting mechanism
cannot be activated accidentally.
2 -
When hitching the machine to the three-point
lifting mechanism of the tractor, ensure that the
diameters of the pins or gudgeons correspond to
the diameter of the tractor ball joints.
3 -
Caution! In the three-point lifting zone, there
may be a danger of crushing and shearing.
4 -
Do not stand between the tractor and the
machine whilst operating the external lift control
lever.
5 -
When in transport, lifting mechanism stabilizer
bars must be fitted to the machine to avoid
floating and side movement.
6 -
When transporting the machine in the raised
position, lock the lift control lever.
DRIVE EQUIPMENT
(Power take-off and universal drive shafts)
1 -
Only use universal drive shafts supplied with
the machine or recommended by the
manufacturer.
2 -
Power take-off and universal drive shaft
guards must always be fitted and in good
condition.
Safety regulations
Risk of accident
Risk of damage to the machine
Operating tip
These symbols are used in these instructions every time recommendations are provided concerning your safety, the safety of others or the
correct operation of the machine.
These recommendations must be given to all users of the machine.
GB