Sukup Fastir, Owner’S Instruction And Parts Manual

Page: 66 / 70

Fastir Parts Assembly Manual
66
IX. Rotating Contact
Figure 63 - Rotating Contact Assembly, Exploded View
Table 31 - Rotating Contact Parts List
Ref # Description Qty Comp # The following are complete rotating contacts with cords. Listed are standard
replacement cord lengths. If different length is required, specify desired length
when ordering. See
Table 33
.
1 Rot. Cont. Center, 3 -wire 1ph 1 A5558
Comp # Volts # of Leads Phase Spool Wire Cord Length
Rot. Cont. Center, 4-wire 3ph A5559 A5504 230 Single 1 3 17’10”
Rot. Cont. Center, 5-wire 1ph A5585 A5532 230 Single 3 4 17’10”
Rot. Cont. Center, 7-wire 3ph A5560 A5539 460 Single 3 4 19’2”
2 Rotating Contact, Can, Single A5549 A5475 230 Dual 1 5 12’10”, 10’10”
Can, Lead Side Only A5594 A5476 230 Dual 1 5 15’10”, 10’10”
Can, Side Only, Single A5595 A5477 230 Dual 1 5 17’10”, 10’10”
A5478 230 Dual 1 5 24'10", 10'10"
Rotating Contact, Can, Dual 1 A5550 A5480 230 Dual 3 7 12’10”, 10’10”
Can, Lead Side Only A5594 A5481 230 Dual 3 7 15’10”, 10’10”
Can, Side Only, Dual A5596 A5482 230 Dual 3 7 17’10”, 10’10”
3 Screw, #8-18 x ½” PLT, S Drill 4 J0460 A5483 230 Dual 3 7 24’10”, 10’10”
4 Cont. Bd 1ph w/htr 3 term 1*+ A5563 The following are rotating contacts without cord:
Cont. Bd w/o htr 3 terminals A5578 A5551 230 Single 1 3 N/A
Cont. Bd 3ph w/htr 3 terminals A5561 A5553 230 Single 3 4 N/A
Cont. Bd 3ph w/o htr 3 terminals A5561 A5554 460 Single 3 4 N/A
Cont. Bd 460 3ph w/htr, 3 terminal A5582 A5555 230 Dual 1 5 N/A
5 #6032 x ¼” pan head mach screw 4* J0455 A5556 460 Dual 3 7 N/A
6 Contact board heater, 230V 1 J5530 A5557 230 Dual 3 7 N/A
Contact board heater, 460V, 40k J5532
Note:
Can should be sealed with tub and tile caulk. Spool should spin freely after
assembly. If spool binds, find and correct problem before installing on stirring
machine.
7 Cord 12-3, (specify lgth req.) 1* K6331
Cord 14-4, (specify lgth req.) K6401
8 8P-2 Heyco bushing 1* J5000
9 3-prong female plug 3494 1* J3720
4-prong female plug 2456, 460V
wired direct
J3730
*Number required for single lead rotating contact. Qty required for
dual lead rotating contact is double.
+Single lead contacts require 1 board w/ heater. Dual lead
contacts require 1 board w/ heater, 1 without.