General Safety
5
I. General Safety Practices
On safety decals, this symbol and the
signal words Danger, Warning, Caution
and Notice draw your attention to
important instructions regarding safety.
They indicate potential hazards and levels of intensity.
RED -
DANGER
indicates an
imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
ORANGE -
WARNING
indicates a potentially
hazardous situation which, if not avoided, could result
in death or serious injury.
YELLOW -
CAUTION
indicates a potentially
hazardous situation which, if not avoided, may result
in minor or moderate injury.
BLUE -
NOTICE
alerts you to
practices unrelated to personal
injury, such as messages related to property damage.
IMPORTANT:
To prevent death or serious injury to
you or your family, it is essential that safety decals
are clearly visible, in good condition, and applied to
the appropriate equipment.
FOLLOW MACHINE SAFETY DECAL MESSAGES
Carefully read this manual and
all safety decals on your
equipment.
Safety decals must
be kept in good condition.
Replace missing or damaged
safety decals free of charge by
contacting Sukup Manufacturing
Co. by mail at PO Box 677, Sheffield, Iowa 50475; by
phone at 641-892-4222; or by e-mail at
[email protected].
It is the responsibility of the owner/operator to know
what specific requirements, precautions, and work
hazards exist. It is also the responsibility of the
owner/operator to inform anyone operating or
working in the area of this equipment of hazards and
safety precautions that need to be taken to avoid
personal injury or death. Always keep children away
from bins and vehicles with flowing grain.
Make no unauthorized modifications to machine.
Modifications may endanger function and/or safety of
unit. Keep unit in good working condition. Keep shields
in place. Replace worn or missing shields free of
charge by contacting Sukup Manufacturing Co.
GRAIN BIN SAFETY
Owners/operators are responsible for developing
site-specific confined space entry procedures.
OSHA’s confined space entry procedures (29CFR
1910.146) can be found at www.osha.gov.
If you must enter bin for repair or maintenance:
Use a safety harness, safety line and respirator
Station another person outside of bin
Avoid the center of the bin
Wear appropriate personal protective equipment
Keep clear of all augers and moving parts
DANGER!
Never enter bin unless all power is
locked off and another person is present.
Rotating augers can dismember or kill!
Flowing grain may trap and suffocate. If you enter a
bin of flowing grain you can be completely
submerged in grain in about 8 seconds.
Failure to heed these warnings could result in death
or serious injury.
NEVER clean out bin with augers running!
When bin is nearly empty, sweep (floor) augers will
travel at an increasing speed; just turning around can
give augers enough time to trap you. Keep away from
sweep and sump augers to avoid entanglement.
Failure to heed this warning could result in death or
serious injury.
Read manual before installing or using product. Failure to follow instructions and safety precautions in
manual can result in death or serious injury. Keep manual in a safe location for future reference.
Summary of Contents for Fastir
Page 4: ...Limited Warranty 4 LIMITED WARRANTY...
Page 50: ...Appendix A Wiring Diagrams 50 Figure 52 Double Auger Fastir Wiring Diagram...
Page 51: ...Appendix A Wiring Diagrams 51 Figure 53 Triple Auger Fastir Wiring Diagram...
Page 52: ...Appendix A Wiring Diagrams 52 Figure 54 Quadruple Auger Fastir Wiring Diagram...
