Sugon I620-G20 User Manual Download Page 3

Page: 3 / 155

iii

Trademark and Copyright

"SUGON" and its icon are the trademark or registered trademark of DAWNING INFORMATION INDUSTRY CO.,

LTD.

"SUGON" and its icon are the trademark or registered trademark of DAWNING INFORMATION INDUSTRY CO.,

LTD. "DAWNING INFORMATION INDUSTRY CO., LTD" is hereinafter referred to as "Sugon".

"Intel" and "Xeon" icons are the registered trademarks of Intel.

“Microsoft”, “Windows”, “Windows Server” and “Windows Server System” are the trademarks or registered

trademarks of Microsoft.

Other products, logos and trademarks which are mentioned in this manual but not listed above may also be

trademarks or registered trademarks of other companies, and are owned by their respective companies, other

organizations or individuals.

The accompanying software described in this user's manual is provided according to the terms and conditions of

the end user license agreement, and can only be used and reproduced in accordance with the provisions of the

end user license agreement.

This manual is protected by the copyright laws and regulations, and all or any part of this manual shall not be

reproduced, copied, deleted or compiled into the machine-readable format in any way without the prior written

authorization of Sugon, or stored in the retrieval system in any form, or transmitted over the wired or wireless

network, or translated into any text in any way.

Summary of Contents for I620-G20




























































































































































Search results

Summary of Contents for I620-G20

Reviews:

Related manuals for I620-G20

Brands by name

Popular brands

Sugon I620-G20, User Manual

Search results

Summary of Contents for I620-G20

Reviews:

Related manuals for I620-G20

Brands by name

Popular brands