Sugon I620-G20 User Manual Download Page 129

Page: 129 / 155

109

Figure 3-119 Virtual media mounting interface

On this figure, Flop Key Media area can mount floppy disk or floppy drive (when the PC provides

the floppy drive). To mount the image, you should click Browse. You should find and select the

mirroring file to mount and then click the right “Connect Floppy” button.

The CD/DVD Media area can mount the CD image in a manner as the floppy drive image and can

mount the CD ROM. You should select the CD ROM symbol (G in the figure) and then click

“Connect CD/DVD” button.

Hard disk/USB Key Media area can mount ima and img mirroring files or mount the local hard disk

or U disk (when the PC includes U disk). The mounting method is same as the above mirroring

and CD ROM.

Snapshot function

Shown as the figure 3-120, to select Capture Screen sub-menu under Video menu or use Alt+S

shortcut key, you can cut the interface on the current console. To select the file saving location on

the pop-

up file saving dialog and set the file name and click “Save”, you can save the file.

Summary of Contents for I620-G20




























































































































































Search results

Summary of Contents for I620-G20

Reviews:

Related manuals for I620-G20

Brands by name

Popular brands

Sugon I620-G20, User Manual

Search results

Summary of Contents for I620-G20

Reviews:

Related manuals for I620-G20

Brands by name

Popular brands