Sugon I620-G20 User Manual Download Page 140

Page: 140 / 155

120

4 OS installation guide

This guide includes the following OS, including Windows 2008 Enterprise Server and Red Hat

Enterprise Linux6 update.

4.1 Windows 2008 Enterprise Server R2 SP1 64bit

Installation steps:

Step 1: Power on, place the CD marked with “Microsoft Windows 2008 Server” into the CD ROM,

and boot from the CD.

Step 2: Select installation language, time and keyboard layout and then click “Next”.

Step 3: Click “Install now” and start to install it.

Step 4: Display SN input interface, correctly input the SN according to the prompt, and click

“Next”.

Step 5: Next select the 2008 server version to install. With Windows Server 2008 Enterprise as

the example, check the prompt “I have selected the edition of Windows that I purchased” under

the screen, and click “Next”.

Step 6: Check “I accept the license terms” on the webpage and click “Next”.

Step 7: Select “Custom” mode on the displaying interface and install it.

Step 8: If the user is not configured with RAID card, you can directly install it on the hard disk

partition. If RAID card is configured, you should select “Load Driver” and load the driver of the

corresponding RAID card.

Step 9: After configuration is completed, to click “Next”, the system installation will start.

Step 10: The system will automatically restart during installation. After tens of minutes, the system

installation is completed and the user password should be configured.

Note: The Windows 2008 password should include English letters, numbers and symbols.

Step 11: After completion, a user can normally use Windows 2008 Server OS.

Note: A user may load drivers for some external plug-in cards.

4.2 Red Hat Enterprise Linux AS 6 Update 2 X86_64

Installation steps

Step 1: Power on, place

the CD marked with “Redhat Linux Advanced Server 6 Update 2(64bit)

DVD” into the CD ROM, and start from CD. If requested, please load the floppy disk driver via

linux dd mode.

Step 2: To select “Skip”, you can skip the detection CD. If the user wants to detect integrity of the

system CD, he can select “OK”.

Summary of Contents for I620-G20




























































































































































Search results

Summary of Contents for I620-G20

Reviews:

Related manuals for I620-G20

Brands by name

Popular brands

Sugon I620-G20, User Manual

Search results

Summary of Contents for I620-G20

Reviews:

Related manuals for I620-G20

Brands by name

Popular brands