Current time
Electrolysis
Intensity of the production in gr/h
Communication display - mother board
red
indicates communication error
Polarity 1 /
Pol 2
Polarity 2
Production automatically reduced to
the % selected (see display 1.3)
Waiting time
Lack of conductivity or salt / scale on
cell / exhausted cell (check working
hours)
Filtration stopped due to lack
of water flow
PLUS key
Modify value/selection
MINUS key
Modify value/selection
OK key
Select/confirm
UP key
Navigation up
DOWN key
Navigation down
RETURN/ESCAPE key
1.1
Electrolysis:
Programming of
electrolysis functions.
1.2 Level:
Desired production of
chlorine (gr/h).
1.3 Cover:
Connection of
automatic cover.
Reduction
of chlorine
production in percent,
when the pool cover is
closed.
1.4 Boost:
Continuous
filtration during 24h at max
intensity. Auto return to
programmed filtration
mode.
1.5
During the boost period
the redoX control can be
deactivated.
2.11 Password:
Allows to protect the access to the
user´s menu by activating a password. To enter your
password press a combination of 5 keys and the
system will memorize. If you forget the password,
there is a “master password”. Ask you installer/
provider
2.12 Time info:
The system memorizes the operation
times of the different modules and they are displayed
on the screen.
2.13 System info:
Information about the available
software version of the TFT display and the power
module. It also shows the ID node which is necessary
for the configuration of the WIFI connection of the
system.
2.3 Setting
of preferred language.
2.5 Setting
of day and current time.
2.7 Setting
of the intensity of the display lighting
(0-100%) and programming its ON and OFF time.
2.9 Sound:
Programming of the system to emit
sound for the functions: Keyboard (keys); Notices
(pop-up message); Alarms (working alarm);
Filtration (start of the filtration).
Main screen
5 - FUNCTIONING OF THE SYSTEM
5.1 - ELECTROLYSIS
5.2 - SETTINGS
Pol 2
Cover
---
Low
Flow
12:30
electrolysis
Pol 2
250
gr/h
Cover
Low
OK
OK
OK
OK
OK
OK
OK
6.1 Connect
each device individually to the power supply.
6.2 Connect
the flow switch to each device.
6.3 Apply
a bridge between SLAVE and GND to each device.
6.4 Adjust
the production for each device on
the Electrolysis menu.
7.1 Connect
each device individually to the power
supply.
7.2 Connect
the flow switch to each device.
7.3 Connect
all the NEOSAL devices to the external unit
as shown on the image.
7.4 Adjust
the production for each device on the
Electrolysis menu.
6 - CONNECTION WITHOUT EXTERNAL UNIT
7 - CONNECTION WITH EXTERNAL UNIT
7.1
6.1
6.2
6.3
6.4
7.4
7.2
2.10
2.6
2.1
2.7
2.2
2.8
2.3
2.9
2.3
2.4
2.5
2.11
2.12
2.13
2.14
7.3
Use only genuine replacement parts Hayward
Revb _ 2022
USER MANUAL
USER MANUAL
EN
EN
OK
1.1
1.2
1.3
1.4
1.5
2x
External unit
Salt chlorinator 1
Salt chlorinator 2
10
11
Use only genuine replacement parts Hayward
Revb _ 2022
