manualshive.com logo in svg

Subaru Legacy 2021, Owner'S Manual

Introducing the Subaru Legacy 2021, an exceptional vehicle built to elevate your driving experience. Designed with cutting-edge technology, superior performance, and innovative safety features, this sedan seamlessly blends comfort and style. Kickstart your journey with the user-friendly "Getting Started Manual". Download it for free from our website and embark on an unforgettable adventure with your Subaru Legacy 2021.

Share
Download
background image

(167,1)

北米Model "A2600BE-B" EDITED: 2020/ 10/ 1

3-1. Ignition Switch (Models without

Push-Button Start System) .......................... 168

Key Positions ..................................................... 168
Key Reminder Chime .......................................... 169
Ignition Switch Light........................................... 169

3-2. Push-Button Ignition Switch (Models with

Push-Button Start System) .......................... 170

Safety Precautions.............................................. 170
Operating Range for Push-Button Start System... 170
Switching Power Status ...................................... 171
When Access Key Fob Does Not Operate

Properly ........................................................... 172

3-3. Hazard Warning Flasher................................. 172
3-4. Meters and Gauges ........................................ 173

Speedometer ...................................................... 173
Tachometer......................................................... 173
Odometer ........................................................... 173
Double Trip Meter ............................................... 174
Fuel Gauge......................................................... 174
Engine Coolant Temperature Gauge .................... 175
Combination Meter Settings ................................ 175

3-5. Illumination Brightness Control .................... 175

Auto Dimmer Cancel Function ............................ 176

3-6. Warning and Indicator Lights ........................ 177

Seatbelt Warning Light and Chime ...................... 177
SRS Airbag System Warning Light ...................... 181
Front Passenger’s Frontal Airbag ON and OFF

Indicators ......................................................... 181

CHECK ENGINE Warning Light/Malfunction

Indicator Light .................................................. 182

Charge Warning Light ......................................... 183

Oil Pressure Warning Light ................................ 183
Engine Low Oil Level Warning Indicator ............. 183
AT OIL TEMP Warning Light ............................... 184
Low Tire Pressure Warning Light (U.S.-Spec.

Models)............................................................ 184

ABS Warning Light............................................. 185
Brake System Warning Light .............................. 186
Electronic Parking Brake Indicator Light............. 187
Auto Vehicle Hold ON Indicator Light ................. 188
Auto Vehicle Hold Operation Indicator Light ....... 188
Low Fuel Warning Light ..................................... 189
Door Open Indicator........................................... 189
Engine Hood Open Warning Light ...................... 189
Windshield Washer Fluid Warning Light ............. 189
All-Wheel Drive Warning Light ............................ 189
Power Steering Warning Light ............................ 189
Vehicle Dynamics Control Warning Light/

Vehicle Dynamics Control Operation Indicator
Light ................................................................ 190

Vehicle Dynamics Control OFF Indicator Light .... 191
Warning Chimes and Warning Indicator of the

Keyless Access with Push-Button Start
System (If Equipped) ........................................ 191

Security Indicator Light ...................................... 196
SI-DRIVE Indicator Light (If Equipped) ................ 197
Select Lever/Gear Position Indicator ................... 197
Turn Signal Indicator Lights ............................... 197
High Beam Indicator Light.................................. 197
High Beam Assist Indicator ................................ 197
Automatic Headlight Beam Leveler Warning

Light ................................................................ 198

LED Headlight Warning Light ............................. 198

Instruments and Controls

3

Instruments

and

Controls

Summary of Contents for Legacy 2021

















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Legacy 2021

Honda 2004 S2000 Owner'S Manual preview
2004 S2000
Brand: Honda Pages: 208
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Easee Home Wallbox Installation Instructions Manual preview
Home Wallbox
Brand: Easee Pages: 12
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Subaru 1998 Forester Owner'S Manual preview
1998 Forester
Brand: Subaru Pages: 298
Caltrend LY115 Installation Instructions preview
LY115
Brand: Caltrend Pages: 3
BENDIX A-18 TRAILER ABS Manual preview
A-18 TRAILER ABS
Brand: BENDIX Pages: 40
Toyota RAV4 HV 2016 Quick Reference Manual preview
RAV4 HV 2016
Brand: Toyota Pages: 56
Mopar 2005-2009 Chrysler 300C Installation Instructions Manual preview
2005-2009 Chrysler 300C
Brand: Mopar Pages: 7
MiX Telematics FM 3617i Installation Manual preview
FM 3617i
Brand: MiX Telematics Pages: 39
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
iSimple DUALINK PGHGM2 Owner'S Manual preview
DUALINK PGHGM2
Brand: iSimple Pages: 16
Buzz Rack Atomic Buzz Manual preview
Atomic Buzz
Brand: Buzz Rack Pages: 8
PIE FRDN/PC-POD2 Application And Installation Instructions preview
FRDN/PC-POD2
Brand: PIE Pages: 2
Cadillac 2009 ESCALADE EXT Specifications preview
2009 ESCALADE EXT
Brand: Cadillac Pages: 1
Thule 202 Installation Instructions preview
202
Brand: Thule Pages: 1

Brands by name

Popular brands

Load more brands