Subaru Legacy 2021, Owner'S Manual

Page: 175 / 592

(171,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
NOTE
. To turn the key from the “ACC” to
“LOCK” position, the select lever must
be in the “P” position and the key must
be pushed in and turned.
. If your registered key fails to start
the engine, pull out the key once (the
security indicator light will blink), and
then insert the key again and turn it to
the “START” position again to restart
the engine.
. The engine may not start in the
following cases:
– The key grip is touching another
key or a metallic key holder.
– The key is near another key that
contains an immobilizer transpon-
der.
– The key is near or touching
another transmitter.
& Key Reminder Chime
The reminder chime sounds when the
driver’s door is opened and the ignition
switch is in the “LOCK” or “ACC” position.
The chime stops under the following
conditions.
. The ignition switch is turned to the “ON”
position.
. The key is removed from the ignition
switch.
. The driver’s door is closed.
&
Ignition Switch Light
For easy access to the ignition switch in
the dark, the ignition switch light illumi-
nates when driver’s door is opened or
when the driver’s door is unlocked using
the remote keyless entry transmitter.
The light remains illuminated for approxi-
mately 30 seconds and gradually turns off
under the following conditions.
. The driver’s door is closed.
. The doors are unlocked using the
remote keyless entry transmitter.
– CONTINUED –
Ignition Switch (Models without Push-Button Start System)
169
3
Instruments
and
Controls