Subaru Legacy 2021, Owner'S Manual

Page: 133 / 592

(129,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
. Lock or unlock by the remote keyless
entry system.
. Open a door and then close it.
. Turn the push-button ignition switch to
the “ON” position.
& Power Saving Function of
Access Key Fob
This function stops the access key fob
from receiving signals and helps minimize
the battery consumption of the access key
fob.
1. Press the “ ” button twice while hold-
ing the “ ” button.
1) LED indicator
2. Confirm that the LED indicator blinks 4
times to notify that the setting is complete.
When the access key fob is in the power
save mode, the keyless access function
and push-button start system will not be
available.
To cancel the power save mode, press one
of the buttons on the access key fob.
& Disabling Keyless Access
Function
WARNING
If you have an implanted pacemaker
or an implanted defibrillator, per-
form the procedure “By operating
the driver’s door”
F
P128 to disable
the keyless access function. If you
perform the procedure “By operat-
ing the access key fob”
F P128, the
operation of an implanted pace-
maker or implanted defibrillator
may be affected by the radio waves
from the transmitter antenna.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the key-
less access function can be disabled.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. To start the engine while the func-
tions are disabled, perform the proce-
dure described in “Starting Engine”
F P466.
– CONTINUED –
Keyless Access with Push-Button Start System
127
2
Keys
and
Doors