Subaru Legacy 2021, Owner'S Manual

Page: 356 / 592

(352,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
! Shift lock release
If the select lever cannot be operated, turn
the ignition switch back to the “ON”
position, then move the select lever to
the “P” position with the select lever button
pressed and the brake pedal depressed.
If the select lever does not move after
performing the above procedure, check
and confirm the following and release the
shift lock accordingly.
. When the select lever cannot be
shifted from “P” to “N”:
Refer to “Shift lock release using the shift
lock release portion”
F
P350.
. When the select lever cannot be
shifted from “N” to “R” or “P”:
Place the ignition switch in the “ACC”
position, then move the select lever to the
“P” position with the brake pedal de-
pressed.
If the select lever still does not move, refer
to “Shift lock release using the shift lock
release portion”
F
P350.
If the shift lock cannot be released without
using the shift lock release button in the
above cases, there may be a malfunction
in the shift lock system or the vehicle
control system.
Contact a SUBARU dealer for an inspec-
tion as soon as possible.
! Shift lock release using the shift
lock release portion
Perform the following procedure to release
the shift lock.
1. Apply the parking brake and stop the
engine.
1) Hole
2. Turn over the inner trim of the pocket.
3. Remove the grip portion of the screw-
driver.
4. While depressing the brake pedal,
insert the screwdriver into the hole, press
the shift lock release portion using the
screwdriver, and then move the select
Continuously Variable Transmission
350