Subaru Legacy 2021, Owner'S Manual

Page: 291 / 592

(287,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
4-3. Automatic Climate Con-
trol Operation
Climate control screen (dual 7.0-inch dis-
play models)
Climate control screen (11.6-inch display
models)
1) Airflow distribution
2) Air inlet selection
3) Air conditioner compressor
4) Fan speed
When the full auto mode is selected, the
following functions are automatically con-
trolled.
. Fan speed
. Airflow distribution
. Air inlet selection
. Air conditioner compressor operation
To activate this mode, perform the follow-
ing.
1. Touch the climate control mode indi-
cator.
2. Touch “AUTO”.
3. Set the preferred temperature. Refer to
“Temperature Control”
F
P288.
NOTE
.
Operate the automatic climate con-
trol system when the engine is running.
. Even when cooling is not necessary,
the air conditioner compressor will
automatically turn on if the temperature
is set much lower than the current
outlet air temperature. Even in this
case, the “A/C” indicator light on the
climate control screen illuminates.
.
The air conditioner may not operate
in the following cases:
– When the cabin temperature is
low
– When the ambient temperature
decreases close to 32
8 F (0 8 C)
. The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
. If something other than temperature
control is operated while the display is
in full auto mode, the “FULL” indicator
will turn off and the “AUTO” indicator
light will remain illuminated. You can
then manually control the system as
desired using the climate control
screen. To change the system back to
full auto mode, touch “AUTO”.
– CONTINUED –
Automatic Climate Control Operation
285
4
Climate
Control