Subaru Forester Manual Download Page 206

Page: 206 / 397

Black plate (212,1)

一

般

Model "A8140GE-A" EDITED: 2007/ 12/ 13

5-24

Audio

*1: The frequency last received in the selected
waveband will be displayed.

*2: Only when a CD is in the player.

*3: Only when with an auxiliary audio product is
connected.

NOTE

The

“

”

and

“

”

modes are dis-

played on the type A and B audio. For
the type C audio those are displayed as

“

”

mode.

“ ”

and

“ ”

buttons

With radio mode selected

Briefly press the

“ ”

button or

“ ”

button

to select a preset channel.
Press the

“ ”

button or

“ ”

button for

more than 0.5 second. The radio will seek

the next receivable station and stop on it.
That station

’

s frequency will be shown on

the audio display.

With CD mode selected

Press the

“ ”

button to skip forward in the

track/file (track) order. Press the

“ ”

button to skip backward in the track/file
(track) order.
The track/file (track) number will be shown
on the audio display.

Volume control buttons

Press the

“

”

button to increase the

volume. Press the

“

−

”

button to reduce

the volume.
A number indicating the volume will be
shown on the audio display.

MUTE button

Press this button if you wish to immedi-
ately cut the volume to zero.
The audio display will show

“

MUTE

”

If you press the button again, the original
sound volume will return and

“

MUTE

”

goes off.

Summary of Contents for Forester














































































































































































































































































































































































































Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands

Subaru Forester, Manual

Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands