Subaru Forester Manual Download Page 107

Page: 107 / 397

Black plate (110,1)

一

般

Model "A8140GE-A" EDITED: 2007/ 12/ 13

2-26

Keys and doors

Vehicle with genuine SUBARU naviga-
tion system:

The automatic locking function

’

s opera-

tional/non-operational setting and the
setting for the locking time period can be
changed using the monitor. For details,
please refer to the Owner

’

s Manual

supplement for the navigation system.

Vehicle without genuine SUBARU navi-
gation system:

The automatic locking function can be
canceled by a SUBARU dealer. We
recommend that you contact the nearest
SUBARU dealer for details.

Unlocking rear gate

Vehicle without double locking
system

Pressing the

“

”

button unlocks the rear

gate.

Vehicles with double locking sys-
tem

When the

“

OPEN

”

button is pressed

continuously for at least 2 seconds, all
four doors unlock and the rear gate then
unlocks.

Interior light interlock func-
tion

The dome light and the map lights will
illuminate when the

“ ”

“

OPEN

”

button

is pressed. The dome light and the map
lights will illuminate for approximately 15
seconds and gradually turn off. When the

“ ”

“

LOCK

”

button is pressed, the dome

light and the map lights immediately turn

off. Also, the dome light and the map lights
will start going out if the key is turned to
the

“

”

position.

To activate this function, set the dome light
switch to the

DOOR

position.

The setting for the illumination period of
the dome light and the map lights can be
changed by a SUBARU dealer in accor-
dance with your wishes.

Vehicle with genuine SUBARU navi-

gation system:

The setting can be changed using the
monitor. For details, please refer to the
Owner

’

s Manual supplement for the navi-

gation system.
The setting can also be changed by a
SUBARU dealer. We recommend that you
contact the nearest SUBARU dealer for
details.

Vehicle without genuine SUBARU

navigation system:

The setting can be changed by a
SUBARU dealer. We recommend that
you contact the nearest SUBARU dealer
for details.

Replacing battery

If the transmitter fails to operate when
used within the standard distance, this
may indicate a weak battery. Replace the
battery as soon as possible. It is recom-

Summary of Contents for Forester














































































































































































































































































































































































































Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands

Subaru Forester, Manual

Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands