Subaru Forester Manual Download Page 212

Page: 212 / 397

Black plate (218,1)

一

般

Model "A8140GE-A" EDITED: 2007/ 12/ 13

6-4

Interior equipment

Sun visors

To block out glare, swing down the visors.
To use the sun visor at a side window,
swing it down and move it sideways.

Vanity mirror

CAUTION

Keep the vanity mirror cover closed
while the car is being driven to avoid
dazzle.

To use the vanity mirror, swing down the
sun visor and open the vanity mirror cover.

Storage compartment

CAUTION

Always keep the storage com-

partment closed while driving to
reduce the risk of injury in the
event of sudden stops or an
accident.

Do not store spray cans, contain-

ers with flammable or corrosive
liquids or any other dangerous
items in the storage compart-
ment.

Glove box

To open the glove box, pull the handle. To

Summary of Contents for Forester














































































































































































































































































































































































































Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands

Subaru Forester, Manual

Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands