Subaru Forester Manual Download Page 158

Page: 158 / 397

Black plate (163,1)

一

般

Model "A8140GE-A" EDITED: 2007/ 12/ 13

Windshield wiper and washer
switches

The wiper operates only when the ignition
switch is in the

“

”

“

Acc

”

position.

Windshield wipers

OFF: Park

: Intermittent

LO: Low speed
HI: High speed

To turn the wipers on, push the wiper
control lever down.
To turn the wipers off, return the lever to
the

“

OFF

”

position.

Wiper intermittent time control

When the wiper switch is in the

“ ”

position, turn the dial to adjust the operat-
ing interval of the wiper.
The operating interval can be adjusted in
nine steps.

Mist (for a single wipe)

For a single wipe of the wipers, pull the
lever toward you. The wipers operate until
you release the lever.

Instruments and controls

3-41

–

CONTINUED

–

Summary of Contents for Forester














































































































































































































































































































































































































Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands

Subaru Forester, Manual

Search results

Summary of Contents for Forester

Reviews:

Related manuals for Forester

Brands by name

Popular brands