Black plate (151,1)
北
米
Model "A2440BE-B" EDITED: 2007/ 5/ 7
corresponding system.
Consult your authorized SUBARU dealer
for repair.
&
Seatbelt warning light
and chime
Your vehicle is equipped with a seatbelt
warning device at the driver
’
s and front
passenger
’
s seat, as required by current
safety standards.
With the ignition switch turned to the
“
ON
”
position, this device reminds the driver
and front passenger to fasten their seat-
belts by illuminating the warning lights in
the locations indicated in the following
illustration and sounding a chime.
Driver
’
s warning light (Vehicle with SI-
DRIVE)
Driver
’
s warning light (Vehicle without SI-
DRIVE)
Front passenger
’
s warning light
!
Operation
If the driver and/or front passenger have/
has not yet fastened the seatbelt(s) when
the ignition switch is turned to the
“
ON
”
position, the seatbelt warning light(s) will
flash for 6 seconds, to warn that the
seatbelt(s) is/are unfastened. If the dri-
ver
’
s seatbelt is not fastened, a chime will
also sound simultaneously.
NOTE
.
If the driver
’
s and/or front passen-
ger
’
s seatbelt(s) are/is still not fastened
6 seconds later, the seatbelt warning
device operates as follows according
to the vehicle speed.
.
At speeds lower than approxi-
mately 9 mph (15 km/h)
The warning light(s) for unfastened
seatbelt(s) will alternate between
steady illumination and flashing at
15-second intervals. The chime will
not sound.
.
At speeds higher than approxi-
mately 9 mph (15 km/h)
The warning light(s) for unfastened
seatbelt(s) will alternate between
flashing and steady illumination at
15-second intervals and the chime
will sound while the warning light(s)
is/are flashing.
.
It is possible to cancel the warning
operation that follows the 6-second
warning after turning ON the ignition
Instruments and controls
3-29
–
CONTINUED
–
3
