Black plate (138,1)
北
米
Model "A2440BE-B" EDITED: 2007/ 5/ 7
3-16
Instruments and controls
To change the current setting, take the
following steps.
1. Within 12 seconds after turning on the
ignition switch, press the
“
/SET
”
switch
for at least 2 seconds.
2. T h e
d i s p l a y
s h o w s
“
M E T E R
SETTING
”
, and then changes to the
setting screen.
3. When the setting screen is displayed,
select
“
Initial movement
”
by pressing the
“ ”
or
“ ”
switch. And press the
“
/
SET
”
switch to enter the setting process.
4. Select
“
ON
”
for activated initial move-
ment or
“
OFF
”
for deactivated initial move-
ment by pressing the
“ ”
or
“ ”
switch.
And press the
“
/SET
”
switch to decide
the desired setting.
If you do not need to change the previous
setting, select
“ ”
and press the
“
/SET
”
switch.
5. Select
“
End
”
by pressing the
“ ”
or
“ ”
switch. And press the
“
/SET
”
switch
to finish the meter setting menu.
NOTE
.
Your vehicle
’
s initial movement
setting of the meter/gauge needles
has been set for activation
“
ON
”
at
the time of shipment from the factory.
.
If you turn the ignition switch to the
“
Acc
”
position, turn the ignition switch
to the
“
LOCK
”
position, or open and
close the driver
’
s door during the
setting procedure, the new setting will
be canceled.
.
It is not possible to cancel sequen-
tial illumination of the combination
meter while sequential illumination is
actually taking place. Cancel sequen-
