Black plate (193,1)
北
米
Model "A2440BE-B" EDITED: 2007/ 5/ 7
!
Air inlet selection button
Select air flow by pushing the air inlet
selection button
“
/
”
.
The selected air inlet setting is shown on
the control panel.
(Recirculation): Interior air recirculates
inside the passenger compartment. Use
this position when quickly cooling down
the passenger compartment or to prevent
outside air from entering the passenger
compartment. When the recirculation
mode is selected, a
“
”
indicator light
appears on the display.
(Outside air): Outside air is drawn into
the passenger compartment. When the
climate control system is operated in the
“
AUTO
”
mode, this position is selected
automatically. (There is one exception:
When the temperature control dial is
turned fully counterclockwise, the recircu-
lation mode is automatically selected.)
When the outside air mode is selected, a
“
”
indicator light appears on the dis-
play.
WARNING
Continued operation in the
“
”
position may fog up the windows.
Switch to the
“
”
position as soon
as the outside dusty condition
clears.
NOTE
When driving on a dusty road or behind
a vehicle that emits unpleasant exhaust
gases, set the air inlet selection button
to the
“
”
position.
From time to time, return the air inlet
selection button to the
“
”
position
to draw outside air into the passenger
compartment.
&
Temperature sensors
1)
Solar sensor
2)
Interior air temperature sensor
The automatic climate control system
employs several sensors. These sensors
are delicate. If they are treated incorrectly
and become damaged, the system may
not be able to control the interior tempera-
ture correctly. To avoid damaging the
sensors, observe the following precau-
tions:
–
Do not subject the sensors to impact.
–
Keep water away from the sensors.
–
Do not cover the sensors.
The sensors are located as follows:
–
Solar sensor: beside windshield
defroster grille
Climate control
4-11
–
CONTINUED
–
4
