STUDIO DUE Control Five, User'S And Operator'S Manual

Page: 21 / 27

c) Pressing the NEXT (F3) button allows to pass to the second menu, the display will show:
a) Press LGHT (F1) button to set the brightness of the lamp connected to USB socket.
Digit the value of brightness and press OK (F1) or ENTER.
The setting-out is saved on not volatile memory.
b) Press BEEP (F2) button to able or disable the buzzer inside the controller.
The display will shown:
-
To disable the buzzer press OFF (F1).
-
To enable the buzzer press ON (F2).
To leave the function press EXIT (F3) or ESC.
HOW TO MAKE A PATCH:
When on the following main menu:
Press the CNFG (F2) button to enter the configuration menus:
a) Pressing PTCH (F1) to set the patch, the display will show:
Press EXIT (F3) or ESC to leave the function.
To set a new patch read the following the instructions:
1) Using the SPOT keys, select the spot/spots or a group of spots to assign to a model
2) Select the model by +/- buttons (a library of spot models is available)
3) Repeat the same operation for other spots to assign to a different model
4) Press OK (F1) or ENTER
Setting a new patch implies the formatting of the memory, so the controller will show the following request:
Press YES (F1) button or ENTER to confirm the setting of the patch and the formatting of the memory, press
NO (F3) or ESC button to leave the function without any change.
19